The TVOC-2 Arc Guard System is an arc protection relay that mitigates arc faults and helps to protect people and equipment. The Arc monitor is the main unit of the Arc Guard System which detects the light of an arc and through the fast IGBT contacts sends an electrical signal within 1 ms to a nearby breaker that breaks the power and extinguishes the arc. The Arc monitor has 10 detector inputs and can trip up to three breakers with zone selectivity if needed. Up to 2 extension units can extend the number of light detectors to 30 and the unit includes an HMI that can be placed on the outside of the door. Detectors are sold in a wide range of lengths to fit a full switchgear design. Supply voltage 24... 48 V DC. Accessories include current sensing unit, optical cables, cable straps etc.
Baterias de Condensadores
TVOC-2-48 Arc Monitor
Ref Nortécnica:
EAN:
7320500506899
Descrição
Informações Técnicas
Atributos
Método de montagem
Montagem saliente
Largura
210
Modelo
Modular
Altura
230
Profundidade
80
Expansível
Sim
Proteção contra sobrecorrentes
-
Número de entradas
12
Grau de proteção IP, frente
IP54
Acabamento da conexão elétrica
Ligação com parafuso
Tensão de alimentação de corrente nominal de 50 Hz AC
-
-
Tensão de alimentação de corrente nominal de 60 Hz CA
-
-
Tensão de alimentação de corrente nominal DC
24
48
Tipo de tensão para atuação
DC
Número de contatos como contato normalmente fechado
0
Número de contatos como contato normalmente aberto
3
Número de contatos como inversores
3
Proteção contra falha do disjuntor ANSI 50BF
-
Tipo de sensor de luz Arc
-
Número máximo de sensores Arc
30
Número de saídas de trip
3
Tempo de operação trip
1
Número de entradas de corrente faseneutro
-
Corrente nominal das entradas de corrente de faseneutro
-
Número de entradassaídas rápidas de sinais de fibra ótica
-
Grau de proteção IP, lado posterior
-
Número de entradas binárias
-
Número de saídas binárias
-
Tipo do aparelho de comutação
-
Marcas
ABB
Descrição Longa
The TVOC-2 Arc Guard System is an arc protection relay that mitigates arc faults and helps to protect people and equipment. The Arc monitor is the main unit of the Arc Guard System which detects the light of an arc and through the fast IGBT contacts sends an electrical signal within 1 ms to a nearby breaker that breaks the power and extinguishes the arc. The Arc monitor has 10 detector inputs and can trip up to three breakers with zone selectivity if needed. Up to 2 extension units can extend the number of light detectors to 30 and the unit includes an HMI that can be placed on the outside of the door. Detectors are sold in a wide range of lengths to fit a full switchgear design. Supply voltage 24... 48 V DC. Accessories include current sensing unit, optical cables, cable straps etc.