The TVOC-2-H1 is an HMI to be added to the TVOC-2 Arc Guard System Main unit if more than one HMI is needed. The added HMI can be added to the panel door for easier overview. The HMI is connected to the main unit by a 3 m cable with RJ45 connector that comes with the HMI unit. Accessories that comes with the unit are mounting nut, gasket and blank front label.
Description
Technical Information
Attributes
Mounting method
Front mounting
Largura
130
Model
Other
Altura
82
Profundidade
27
Expandable
Yes
Overcurrent protection
-
Number of inputs
0
Degree of protection IP, front side
-
Type of electric connection
Screw connection
Rated control supply voltage AC 50 Hz
-
-
Rated control supply voltage AC 60 Hz
-
-
Rated control supply voltage DC
-
-
Voltage type for actuating
-
Number of contacts as normally closed contact
0
Number of contacts as normally open contact
0
Number of contacts as change-over contact
0
Circuit-breaker failure protection ANSI 50BF
-
Type of arc light sensor
-
Max. number of arc sensors
-
Number of trip outputs
-
Operation trip time
-
Number of phaseneutral current inputs
-
Rated current of phaseneutral current inputs
-
Number of fast fibre optic signal inputsoutputs
-
Degree of protection IP, rear side
-
Number of binary inputs
-
Number of binary outputs
-
Switchgear technology
-
Brands
ABB
Descrição Longa
The TVOC-2-H1 is an HMI to be added to the TVOC-2 Arc Guard System Main unit if more than one HMI is needed. The added HMI can be added to the panel door for easier overview. The HMI is connected to the main unit by a 3 m cable with RJ45 connector that comes with the HMI unit. Accessories that comes with the unit are mounting nut, gasket and blank front label.