Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. Adam safety sensor with DYNlink signal and StatusBus. Used with an Eva actuator to form a non-contact safety sensor Eden. M12-5 male connector. Four pieces of DA 1B distance plates and four pieces of DA 2B distance rings are included. Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications. Eden is UL approved for use in US and Canada.
Electromechanical and Electronic Sensors
Adam DYN-Status M12-5 Sensor
Nortécnica Ref:
EAN:
7350024480313
Description
Technical Information
Attributes
Voltage type
DC
Housing material
Plastic
Suitable for safety functions
Yes
Coating housing
Uncoated
With status indication
Yes
Ambient temperature
-40
70
Switching distance
15
Número de saídas semicondutoras com função de sinalização
1
Número de saídas energizadas por contato com função de sinalização
0
Número de saídas semicondutoras protegidas
-
Número de saídas energizadas por contato protegido
-
Type of interface for safety communication
Other
Type of electric connection
Connector M12
Type of switching output
Other
Explosion safety category for gas
None
Explosion safety category for dust
None
Construction type housing
EV006688
Protected switch distance OFF
25
Protected switch distance ON
10
Corrente de saída max. na saída protegida
0.05
Mechanical mounting condition for sensor
Not flat
Min. output current
-
With monitoring function downstream switching devices
No
Cross-short circuit identification possible
Yes
Degree of protection IP
IP67
Type of actuation
Transponder
Rated supply voltage AC 50 Hz
-
-
Rated supply voltage AC 60 Hz
-
-
Rated supply voltage DC
24
24
Sensor de largura
30
Sensor de diâmetro
-
Altura do sensor
75.2
Comprimento do sensor
12
Performance level according to EN ISO 138491
Level e
SIL according to IEC 61508
3
Degree of protection NEMA
-
Brands
ABB
Descrição Longa
Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring.
Adam safety sensor with DYNlink signal and StatusBus. Used with an Eva actuator to form a non-contact safety sensor Eden. M12-5 male connector. Four pieces of DA 1B distance plates and four pieces of DA 2B distance rings are included.
Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications.
Eden is UL approved for use in US and Canada.