Touch dimmer. For wireless switching and dimming of electrical loads. 3 wire connection (neutral conductor required). Optimised for dimming of retrofit LED lamps (LEDi). For incandescent lamps, 230V tungsten halogen lamps and low-voltage halogen lamps with conventional transformers or electronic transformers and dimmable halogen energy-saving lamps. Mix operaton of LEDi with conventional loads possible. With adjustable minimum brightness. The minimum brightness for the leading edge control can be adjusted using the potentiometer. The potentiometer at the left limit stop corresponds with the trailing edge control mode. Low-noise level by MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With light-level memory and minimum brightness memory. Without control cover. For ZigBee Light Link control element 6735-xxx, 6736-xxx and 6737-xxx. Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 200 W/VA (non-LED loads).
Switches, Dimmers, and Buttons
Dimmer insert Zigbee Touch control button 230 V 2...100 VA
Nortécnica Ref:
EAN:
4011395189221
Description
Technical Information
Attributes
Mounting method
Flush-mounted
Assembly arrangement
Basic element
Method of operation
Touch control button
Colour
-
Halogen free
No
Número de unidades
-
Connection type
-
Surface protection
Untreated
Power consumption
-
Frequency
-
-
Material quality
Thermoplastic
Type of load
Resistive load
Material
Plastic
Type of fastening
-
Light value memory
-
Substation input
-
Número RAL semelhante
-
Serial dimmer
-
Applicable with movement sensor
-
Applicable with transmission button
-
Applicable with infrared button
-
Applicable with presence indicator
-
Applicable with button
-
Applicable with time switchtimer
-
Impact strength
IK00
Nominal voltage
230
230
Control voltage
220
240
Transparent
-
Surface finishing
Matt
Suitable for degree of protection IP
IP20
Core cross section
-
-
Largura do dispositivo
71
Altura do dispositivo
71
Profundidade do dispositivo
33
Número de módulos sistema de módulos
-
IFTTT support available
No
Dimming phase cut-off trailing edge
-
Dimming phase cut-on leading edge
-
Min. profundidade da caixa de instalação embutida
32
App control via Bluetooth
-
Nominal power resistive load
-
-
Nominal power inductive load
-
-
Nominal power capacitive load
-
-
Compatible with Apple HomeKit
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No
Potência máxima do LED
-
Min. brightness controllable
-
Brands
ABB
Descrição Longa
Touch dimmer. For wireless switching and dimming of electrical loads. 3 wire connection (neutral conductor required). Optimised for dimming of retrofit LED lamps (LEDi). For incandescent lamps, 230V tungsten halogen lamps and low-voltage halogen lamps with conventional transformers or electronic transformers and dimmable halogen energy-saving lamps. Mix operaton of LEDi with conventional loads possible. With adjustable minimum brightness. The minimum brightness for the leading edge control can be adjusted using the potentiometer. The potentiometer at the left limit stop corresponds with the trailing edge control mode. Low-noise level by MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With light-level memory and minimum brightness memory. Without control cover. For ZigBee Light Link control element 6735-xxx, 6736-xxx and 6737-xxx. Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 200 W/VA (non-LED loads).