Cable distribution cabinet with smooth surface. They have a three-point lock with a swivelling lever handle for profile half cylinders. The cabinets are made of hot-pressed, glass-fibre reinforced polyester, dyed through in RAL 7035 light grey. They are corrosion-resistant and UV-resistant, making them suitable for outdoor use. The enclosures are suitable for ambient conditions from -35°C to +70°C. The open door can be easily disassembled by removing the hinge pins for optimal access to the cabinet. The door opening angle is greater than 180°. There are pressed-in core holes in the rear panel to accept M8 press-in nuts for mounting busbars, mounting frames or mounting plates. The enclosures are supplied with an open base, base plates are available as accessories. There are fixing points in the side panel for mounting horizontal busbars. The enclosures are designed for mounting on bases according to DIN 43629 with standard dimensions between the mounting points. EHP300 Cabinet Gr. 00 AP 875x455x320 SHG EH3, profiled with SHGIP44, IK10
Modular Panels
EH3 Enclosure DIN00 F 875x455x320
Nortécnica Ref:
EAN:
5411815240928
Description
Technical Information
Attributes
Colour
Grey
Width
455
Height
875
Depth
875
RAL-number
7035
With mounting plate
No
Number of doors
-
Number of locks
-
Suitable for wall mounting
-
Pre-stamping
-
EMC-version
-
With glazed door
-
Couplable
-
Material quality
-
Material
-
Impact strength
IK10
Degree of protection IP
IP44
Number of connector holes
-
EF005774
-
Suitable for metrical mounting
-
Mounting plate depth-adjustable
-
With ventilation door
-
Surface finishing
Untreated
With rear door
-
Suitable for wall built-in
-
With cover
-
With door
-
Pitched roof
-
Pole fastening
-
Transparent cover
-
Degree of protection NEMA
-
Thermal dissipation Delta T 20 K according to IECTR 60890
-
Max. permitted load of the enclosure according to IEC 62208
-
Max. permitted load of the doors according to IEC 62208
-
Max. permitted load of the mounting plate according to IEC 62208
-
Floor standing wall model
-
Freestanding
-
Corner model
-
Intermediate mounting
-
Brands
ABB
Descrição Longa
Cable distribution cabinet with smooth surface. They have a three-point lock with a swivelling lever handle for profile half cylinders. The cabinets are made of hot-pressed, glass-fibre reinforced polyester, dyed through in RAL 7035 light grey. They are corrosion-resistant and UV-resistant, making them suitable for outdoor use. The enclosures are suitable for ambient conditions from -35°C to +70°C. The open door can be easily disassembled by removing the hinge pins for optimal access to the cabinet. The door opening angle is greater than 180°. There are pressed-in core holes in the rear panel to accept M8 press-in nuts for mounting busbars, mounting frames or mounting plates. The enclosures are supplied with an open base, base plates are available as accessories. There are fixing points in the side panel for mounting horizontal busbars. The enclosures are designed for mounting on bases according to DIN 43629 with standard dimensions between the mounting points. EHP300 Cabinet Gr. 00 AP 875x455x320 SHG EH3, profiled with SHGIP44, IK10